5000 Olympic Bench
5000
Olympic Bench
Standard
- Rugged and stable frame is constructed of attractive 2” x 4” flat oval tubing.
- Four weight horns standard.
- Two tab heights.
Smith Machine
5003 Smith Machine
Standard
- Attractive 2” x 4” flat oval tube construction.
- Six weight horns standard.
- Smooth travel on 1″ linear ball bearings.
- Safety stops.
- Solid steel guide rods are angled at 7° for a more natural movement.
- The weight bar is counterbalanced to just 13lbs.
Preacher Curl Bench
5011 Preacher Curl Bench
Standard
- Open front for access to do standing exercises.
- Seven seat heights from 18″ to 25″.
- Thick protective guards on bar rails.
Optional
- Weight horns available for plate storage.
INTIMIDATOR Power Rack
INTIMIDATOR
Power Rack
Standard
- The rack is 8’ tall constructed of 2″ x 4″ 11 gauge steel tube.
- Inside work space is 38″ front to back and 40″ side to side.
- Large 1 ¼” diameter standard spotter bars extend 4″ in front of the rack for outside work.
- 30 holes spaced less than 2 ¼” apart give you ample adjustment for the spotter arms and 3/8″ thick over-sized J-hooks.
- The eight standard weight storage horns are welded at a 2° angle to prevent weights plates from easily falling off.
- Two fixed upper band pegs and two chain storage hooks are standard.
5004Deluxe 2-Tier Dumbbell Rack
5004
Deluxe 2-Tier Dumbbell Rack
Standard
- Rugged and attractive 2” x 4” flat oval tube frame.
- Holds ten pair of 5lb to 50lb hex dumbbells.
2 Tier Dumbbell Rack
5007-2
69″ 2-Tier Dumbbell Rack
Standard
- The two heavy duty tray shelves of this commercial grade rack are properly spaced and angled for the easy removal and storage of a variety of dumbbells or kettle bells.
- One inch tube front edge protects rubber dumbbells.
- The rack feet are drilled for bolting down and have rubber pads to protect the floor.
- 69.5”L x 35.5”W x 45”H and 204lb. shipping weight.
Optional
- Third tray available for an additional five pair 55-75lb. hex dumbbells or kettle bells.
- Available with 10 pair set of 5-50lb. rubber hex dumbbells (5007-2-550).
69" 3-Tier Dumbbell Rack
5007-3
69″ 3-Tier Dumbbell Rack
Standard
- The three heavy duty tray shelves of this commercial grade rack are properly spaced and angled for the easy removal and storage of a variety of dumbbells or kettle bells.
- One inch tube front edge protects rubber dumbbells.
- The rack feet are drilled for bolting down and have rubber pads to protect the floor.
- 69.5”L x 35.5”W x 45”H and 295lb. shipping weight.
Optional
- Available with 15 pair set of 5-75lb. rubber hex dumbbells (5007-3-1200).
8-Pair Vertical Dumbbell Rack
5008
8-Pair Vertical Dumbbell Rack
Standard
- Holds eight pairs of dumbbells spaced for easy removal and storage.
- Compact footprint is great for small rooms.
- The rack feet are drilled for bolting down and have rubber pads to protect the floor.
- 23.4”L x 19.2”W x 54.5”H and 77lb. shipping weight.
Optional
- Available with 8 pair set of 5-40lb. rubber hex dumbbells (5008-360HXP).
5001 Ab Bench
5001
Ab Bench
Standard
- Rugged frame is constructed with attractive 2” x 4” flat oval tubing.
- Ten positions from 18° to 38°.
- Wheels on base make moving the bench easy.
5005 FID Bench
5005
FID Bench
Standard
- Flat, incline, decline, shoulder.
- Flat height is only 17.5”.
- Seven back pad positions.
- Four seat pad positions.
- Wheels make moving the bench easy.
5070 Hyper-Back Extension
5070
Hyper-Back Extension
Standard
- 45º angle.
- Nine height positions.
- Assist handles.
- Rugged construction for years of service.
VKR Vertical Knee Raise/Dip
VKR
Vertical Knee Raise/Dip
Standard
- Inward angled arm pads.
- Properly angled grips for dip and knee raise.
- Attractive flat oval tube construction.
Interested in the products seen on this page?
Call us or contact us using the form below.
Free Weight Contact Page
THE FITNESS SOLUTION, INC. | PO BOX 260363 PEMBROKE PINES | FLORIDA | 33026
PHONE: 954-505-4178
FAX: 954-450-9661
EMAIL: [email protected]
Copyright 2014 The Fitness Solution, Inc. | All Rights Reserved | Think Big Websites